Laser engraving machines are now widely used, such as carving on the surface of wood, acrylic, bamboo and wood products, but some customers are not clear when carving on the surface. What is the specific reason? Let me invite you.
Reasons for unclear engraving of laser engraving machine:
1. The reverse clearance device is wrong, which can be set in the software.
2. If the belt is too loose, it will also lead to unclear carving. Because the belt is elastic, it will loosen over time. It can be firm by adjusting the belt screws.
3. The engraving parameters are not set correctly. Generally, the smaller the word, the smaller the scanning interval, and the better the engraving effect.
4. It is also related to the laser tube. When engraving, the spot of the laser tube is required to be thinner. If engraving is mainly used, Xiaoyi suggests using a low-power tube, and the spot will be clearer if it is carved carefully.