China best CO2 laser engraver & laser cutter for small business,for sale,cheap and good quality,Sign up for Coupon!
Laser Cutting Machines
Do the parts on the fiber laser cutting machine need to be replaced
2023-01-10 09:46:04 technical college

Do the parts on the fiber laser cutting machine need to be replaced? When many friends use this equipment, some parts are easily worn. After a period of use, they need to check whether these parts can work well. If they are found to have problems, they need to be replaced in time. Please note that the original matching parts must be used when replacing, so that they can work perfectly with each other, If the original matching parts are not used, it may affect the quality and efficiency of production, and even cause some safety accidents because the replaced parts are not the original matching parts. Let's take a look at which parts of this machine may need to be replaced.

The first part that may need to be replaced on the fiber laser cutting machine is the reflective lens, which plays a very important role in the machine equipment. The reflective lens is used for reflection and focusing, so that the laser energy can be concentrated in a range for cutting. After a long time, the reflective lens may be damaged, so it needs to be replaced. The second component that needs to be replaced is the protective lens. During the use of the lens, the protective lens may be damaged due to the impact of some debris, so this component also needs to be replaced. In theory, this component needs to be replaced after about three months of continuous use. The third component that may need to be replaced is the diffusion lens. The existence of this lens is mainly to change the diameter of the laser beam, and can also change the divergence angle of the laser beam in the process of operation. After a long time of use, this component may have some wear, so it is necessary to maintain or replace it regularly. The fourth component that may need to be replaced is the copper nozzle, which generally needs to be replaced after about two months of use. If it is not replaced, the cutting accuracy may be affected.

There are parts that may need to be replaced on the fiber laser cutting machine. Let's briefly introduce them here. There are some methods and precautions for replacement of parts in the instruction manual of this machine and equipment, so it is necessary to carefully read the instruction manual before replacement, and carry out replacement or maintenance of parts according to the instructions in the instruction manual. When replacing, please select the original parts.

Hot keywords

Redsail Tech Co. © 2002-2022. All Rights Reserved.

Contact us